Automotive exhaust system catalytic converter for Volkswagen Touareg 3.2

Carbon monoxide (CO) → Carbon diox

Product introduction

Premium catalytic converter for The Volkswagen Touareg 3.2，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!

First, the core role

Efficient exhaust gas purification to meet stringent emission standards

Conversion of harmful gases: Through platinum (Pt), rhodium (Rh), palladium (Pd) and other precious metal coating, CO (carbon monoxide), HC (hydrocarbons), NOx (nitrogen oxides) in the tail gas into harmless CO₂ (carbon dioxide), H₂O (water), N₂ (nitrogen).

Suitable for large-displacement engines: Touareg 3.2L V6 engine has large displacement and large exhaust gas volume, and the honeycomb carrier structure of the three-way catalytic converter needs to have higher flux and conversion efficiency to comply with emission regulations such as Euro IV/Country IV.

Optimize engine performance

Reduce exhaust back pressure: As an SUV, Touareg often needs to cope with high load conditions (such as off-road and climbing). Blockage of the three-way catalytic converter will lead to increased exhaust resistance. After replacement, the exhaust smoothness can be restored, and the throttle response and power output can be improved.

Stable air-fuel ratio control: Works in conjunction with front and rear oxygen sensors to provide accurate exhaust data to the ECU, ensuring more accurate fuel injection and ignition timing, and indirectly improving combustion efficiency.

Protect engine and peripheral components

Prevention of high temperature damage: The failed catalyst may melt at local high temperature, resulting in blockage of the exhaust system or even damage to the turbine (if it is a turbocharged model). Although Touareg 3.2 is naturally ventilated, the normal operation of the catalyst can avoid the risk of overheating of the exhaust system.

Reduce carbon accumulation: The blockage of the catalytic converter will lead to the exhaust gas backflow, increase the probability of carbon accumulation in the cylinder, and affect the engine life.

2. Special design for Touareg 3.2

High temperature resistance and enhanced durability

The Touareg 3.2L engine has a high operating temperature, and the three-way catalytic converter adopts stainless steel reinforced shell and high-density ceramic carrier, which can withstand high temperatures above 800 ° C and adapt to the continuous high load operation in long-distance high-speed or off-road scenarios.

Suitable for V6 engine exhaust layout

The V6 engine exhaust manifold is arranged on two sides, and some Touareg models may be equipped with double-ternary catalysts (one for each left and right exhaust pipes) to ensure uniform exhaust gas purification on both sides and avoid excessive load on one side.

Deep linkage with the OBD system

Touareg's OBD (on-board Diagnostic System) monitors the catalytic efficiency in real time, and if the conversion rate falls below a threshold (such as precious metal failure or carrier breakage), it triggers a fault code (such as P0420/P0430) and lights up the engine fault light to alert the owner to timely maintenance.

Iii. Failure impact and maintenance suggestions

Failure performance

Power decline, slow acceleration, especially when climbing the feeling of "choking";

Fuel consumption is abnormally increased, and the exhaust gas has a pungent odor (similar to rotten egg smell);

The instrument panel lights up the engine failure light, and the detector reads the fault code for the low efficiency of the catalytic converter.

Maintenance and replacement suggestions

Regular inspection: every 2 years or 50,000 kilometers to check whether the catalytic converter is blocked (can detect the inlet/outlet temperature difference through the infrared thermometer).

Avoid inferior fuel: Use low-sulfur gasoline to prevent sulfide poisoning of precious metal coatings.

Branded alternatives (e.g. Bosch, Walker) : cost-effective, make sure to support V6 engine exhaust flow;

It is strictly prohibited to use the "hollow catalytic converter" (remove the fake parts of the carrier), which may lead to the oxygen sensor reporting errors and illegal.

Iv. Summary

The Touareg 3.2's three-way catalytic converter is not only about environmental compliance, but also the key to ensuring the efficient and stable operation of its high-displacement engines. If there is power attenuation, fault light or excessive exhaust gas in the annual inspection, priority should be given to the catalytic converter status. Regular maintenance and the use of high-quality fuel can significantly extend its life and avoid high replacement costs.

Company profile

Shandong Lijianfei Auto Parts Co., Ltd. has been established for 20 years. As a comprehensive enterprise with profound heritage, we have shown excellent strength in the fields of production, sales and research and development. Our flagship product lineup includes high-performance three-way catalytic converters, innovative modified exhaust mufflers and OE exhaust pipes of all sizes! We are making catalytic converters and exhaust mufflers for all car lines, complete models! All products are made with exquisite workmanship, excellent quality, affordable, designed to meet different customer needs. In particular, our catalytic converter is made of high quality 409 stainless steel with high performance ceramic carrier, which not only significantly improves the effect of purifying exhaust gas, but also effectively eliminates engine failure lights, enhances power output and reduces fuel consumption, and has proven reliability. The exhaust muffler series is a clever blend of 409 stainless steel and top-notch muffler materials, designed for excellent noise reduction performance. Our workers have more than 5 years of professional and rich work experience, from material selection to welding to the manufacturing of finished products, every link is excellence, and all products are all according to the original exhaust pipe mold, and the original exhaust pipe is 1:1 ratio Angle of production and manufacturing! We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring fast response and timely delivery. We warmly welcome your inquiry and look forward to working with you to open a long and mutually beneficial chapter of cooperation!

Factory advantage

1：20 years of professional research and development technology experience, good at automobile three-way catalytic converter, exhaust muffler and auto parts, hardware accessories research and development, all products exquisite workmanship, good quality, affordable, designed to meet the needs of different customers!

2：Our workers have more than 5 years of professional and rich working experience, products from material selection to welding to finished product manufacturing, every link is excellence!

3：We have advanced production equipment, can meet the various customized needs of customers!

4：We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring quick response and timely delivery.

5：Source manufacturers, self-production and self-marketing, compression of intermediate links, making product prices more advantageous!