- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
Changan Benben new model
LQSQP
69$
| Quantity: | |
|---|---|
Product introduction
Factory supply catalytic converters for Changan Benben new model，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1, the exhaust emissions are significantly purified
Efficient conversion of harmful gases
Through the internal platinum (Pt), rhodium (Rh), palladium (Pd) and other precious metal catalysts, the carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx) and other harmful gases in the tail gas into carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂), reducing about 90% of pollutant emissions. Significantly reduce exhaust odor.
After installation, vehicle exhaust emissions can meet national 4, National 5 or even higher standards to ensure that the annual inspection passes.
Avoid environmental compliance risks
If the catalytic converter of the original car is aging or blocked, exhaust emissions may exceed the standard, resulting in failure to pass the annual inspection or be restricted on the road. After replacing the new catalytic converter, compliance can be restored and legal risks arising from environmental issues can be avoided.
2, optimize engine performance and stability
Improve combustion efficiency and power response
The front oxygen sensor detects the exhaust oxygen content and feeds back to the ECU to adjust the air-fuel ratio (ideally 14.7:1), allowing fuel to burn more fully, thereby improving power response and fuel efficiency.
Post-oxygen sensor monitors catalytic status. If the catalytic converter fails, the consistent data of the front and rear sensors will trigger the engine failure light alarm, and such problems can be eliminated after replacement.
Reduce power loss and fuel consumption
Aging catalytic converters may increase exhaust resistance due to blockage, resulting in decreased engine power and increased fuel consumption. The new catalytic converter can restore exhaust smoothness, reduce engine load and improve power output.
3. Prevent failure and prolong the life of components
Avoid abnormal exhaust system
A failed catalytic converter may cause exhaust odor, exhaust pipe burning or abnormal noise, and even damage peripheral components (such as oxygen sensors and exhaust pipes) due to high temperature exhaust gas. After replacement, the risk of such failures can be reduced.
Catalyst clogging can cause engine overheating, and the new catalytic converter can reduce this risk.
Extend service life
If the correct use of high-quality fuel (to avoid lead, sulfur oil products) and regularly clean up carbon deposits, the life of the three-way catalytic converter can reach 80,000-100,000 kilometers, reducing the high cost of frequent replacement (the price of original parts is usually thousands of yuan).
4. Precautions and running-in period after installation
Run-in period requirements
The new catalytic converter needs to work effectively at high temperatures (above 250°C), and the optimal catalytic temperature is 400-800°C. After installation, it is recommended to avoid short trips and ensure that the catalytic converter is sufficiently heated to activate the chemical reaction.
Compatibility and installation specifications
It is necessary to ensure that the catalytic converter is installed in the correct position (behind the exhaust manifold, between the front and rear oxygen sensors) and sealed with the exhaust pipe to prevent air leakage from affecting the purification effect.
If the exhaust gas is still not up to standard after replacement, other engine problems (such as insufficient combustion, oxygen sensor damage, etc.) need to be investigated, rather than relying only on the catalytic converter.
5. Economic and environmental benefits
Reduce long-term maintenance costs
Regular maintenance of catalysts (such as collision avoidance and timely cleaning of carbon deposits) can reduce the frequency of replacement due to blockage or poisoning and save maintenance costs.
Improve the maintenance rate of vehicles
Compliant emissions standards are an important indicator of used car trading, and the installation of new catalysts can avoid depreciation due to emissions issues
| Catalytic converter parameter | |
| Type | catalytic conve |
| Model | Changan Benben new model |
| Standard | Euro IV |
| SIZE | 80cmX24cmX10cm |
| MATERIAL | 409L stainless steel |
| Substrate | Honeycomb ceramic core |
| Application | Automotive Exhaust System |
| MOQ | 1 Set |
| PAYMENT | T/T |
| Packaging & Delivery | 1：Customer requirement |
| 2：Individually bubble wrapped, cartons,pallets, wooden box | |
| PLACE OF ORIGIN | China (Mainland)Shandong |
| Port | Qingdao or Tianjin, China |
| Warranty | 50,000 kilometers a year |
Company profile
Shandong Lijianfei Auto Parts Co., Ltd. has been established for 20 years. As a comprehensive enterprise with profound heritage, we have shown excellent strength in the fields of production, sales and research and development. Our flagship product lineup includes high-performance three-way catalytic converters, innovative modified exhaust mufflers and OE exhaust pipes of all sizes! We are making catalytic converters and exhaust mufflers for all car lines, complete models! All products are made with exquisite workmanship, excellent quality, affordable, designed to meet different customer needs. In particular, our catalytic converter is made of high quality 409 stainless steel with high performance ceramic carrier, which not only significantly improves the effect of purifying exhaust gas, but also effectively eliminates engine failure lights, enhances power output and reduces fuel consumption, and has proven reliability. The exhaust muffler series is a clever blend of 409 stainless steel and top-notch muffler materials, designed for excellent noise reduction performance. Our workers have more than 5 years of professional and rich work experience, from material selection to welding to the manufacturing of finished products, every link is excellence, and all products are all according to the original exhaust pipe mold, and the original exhaust pipe is 1:1 ratio Angle of production and manufacturing! We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring fast response and timely delivery. We warmly welcome your inquiry and look forward to working with you to open a long and mutually beneficial chapter of cooperation!
Factory advantage
1：20 years of professional research and development technology experience, good at automobile three-way catalytic converter, exhaust muffler and auto parts, hardware accessories research and development, all products exquisite workmanship, good quality, affordable, designed to meet the needs of different customers!
2：Our workers have more than 5 years of professional and rich working experience, products from material selection to welding to finished product manufacturing, every link is excellence!
3：We have advanced production equipment, can meet the various customized needs of customers!
4：We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring quick response and timely delivery.
5：Source manufacturers, self-production and self-marketing, compression of intermediate links, making product prices more advantageous!
Product introduction
Factory supply catalytic converters for Changan Benben new model，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1, the exhaust emissions are significantly purified
Efficient conversion of harmful gases
Through the internal platinum (Pt), rhodium (Rh), palladium (Pd) and other precious metal catalysts, the carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx) and other harmful gases in the tail gas into carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂), reducing about 90% of pollutant emissions. Significantly reduce exhaust odor.
After installation, vehicle exhaust emissions can meet national 4, National 5 or even higher standards to ensure that the annual inspection passes.
Avoid environmental compliance risks
If the catalytic converter of the original car is aging or blocked, exhaust emissions may exceed the standard, resulting in failure to pass the annual inspection or be restricted on the road. After replacing the new catalytic converter, compliance can be restored and legal risks arising from environmental issues can be avoided.
2, optimize engine performance and stability
Improve combustion efficiency and power response
The front oxygen sensor detects the exhaust oxygen content and feeds back to the ECU to adjust the air-fuel ratio (ideally 14.7:1), allowing fuel to burn more fully, thereby improving power response and fuel efficiency.
Post-oxygen sensor monitors catalytic status. If the catalytic converter fails, the consistent data of the front and rear sensors will trigger the engine failure light alarm, and such problems can be eliminated after replacement.
Reduce power loss and fuel consumption
Aging catalytic converters may increase exhaust resistance due to blockage, resulting in decreased engine power and increased fuel consumption. The new catalytic converter can restore exhaust smoothness, reduce engine load and improve power output.
3. Prevent failure and prolong the life of components
Avoid abnormal exhaust system
A failed catalytic converter may cause exhaust odor, exhaust pipe burning or abnormal noise, and even damage peripheral components (such as oxygen sensors and exhaust pipes) due to high temperature exhaust gas. After replacement, the risk of such failures can be reduced.
Catalyst clogging can cause engine overheating, and the new catalytic converter can reduce this risk.
Extend service life
If the correct use of high-quality fuel (to avoid lead, sulfur oil products) and regularly clean up carbon deposits, the life of the three-way catalytic converter can reach 80,000-100,000 kilometers, reducing the high cost of frequent replacement (the price of original parts is usually thousands of yuan).
4. Precautions and running-in period after installation
Run-in period requirements
The new catalytic converter needs to work effectively at high temperatures (above 250°C), and the optimal catalytic temperature is 400-800°C. After installation, it is recommended to avoid short trips and ensure that the catalytic converter is sufficiently heated to activate the chemical reaction.
Compatibility and installation specifications
It is necessary to ensure that the catalytic converter is installed in the correct position (behind the exhaust manifold, between the front and rear oxygen sensors) and sealed with the exhaust pipe to prevent air leakage from affecting the purification effect.
If the exhaust gas is still not up to standard after replacement, other engine problems (such as insufficient combustion, oxygen sensor damage, etc.) need to be investigated, rather than relying only on the catalytic converter.
5. Economic and environmental benefits
Reduce long-term maintenance costs
Regular maintenance of catalysts (such as collision avoidance and timely cleaning of carbon deposits) can reduce the frequency of replacement due to blockage or poisoning and save maintenance costs.
Improve the maintenance rate of vehicles
Compliant emissions standards are an important indicator of used car trading, and the installation of new catalysts can avoid depreciation due to emissions issues
| Catalytic converter parameter | |
| Type | catalytic conve |
| Model | Changan Benben new model |
| Standard | Euro IV |
| SIZE | 80cmX24cmX10cm |
| MATERIAL | 409L stainless steel |
| Substrate | Honeycomb ceramic core |
| Application | Automotive Exhaust System |
| MOQ | 1 Set |
| PAYMENT | T/T |
| Packaging & Delivery | 1：Customer requirement |
| 2：Individually bubble wrapped, cartons,pallets, wooden box | |
| PLACE OF ORIGIN | China (Mainland)Shandong |
| Port | Qingdao or Tianjin, China |
| Warranty | 50,000 kilometers a year |
Company profile
Shandong Lijianfei Auto Parts Co., Ltd. has been established for 20 years. As a comprehensive enterprise with profound heritage, we have shown excellent strength in the fields of production, sales and research and development. Our flagship product lineup includes high-performance three-way catalytic converters, innovative modified exhaust mufflers and OE exhaust pipes of all sizes! We are making catalytic converters and exhaust mufflers for all car lines, complete models! All products are made with exquisite workmanship, excellent quality, affordable, designed to meet different customer needs. In particular, our catalytic converter is made of high quality 409 stainless steel with high performance ceramic carrier, which not only significantly improves the effect of purifying exhaust gas, but also effectively eliminates engine failure lights, enhances power output and reduces fuel consumption, and has proven reliability. The exhaust muffler series is a clever blend of 409 stainless steel and top-notch muffler materials, designed for excellent noise reduction performance. Our workers have more than 5 years of professional and rich work experience, from material selection to welding to the manufacturing of finished products, every link is excellence, and all products are all according to the original exhaust pipe mold, and the original exhaust pipe is 1:1 ratio Angle of production and manufacturing! We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring fast response and timely delivery. We warmly welcome your inquiry and look forward to working with you to open a long and mutually beneficial chapter of cooperation!
Factory advantage
1：20 years of professional research and development technology experience, good at automobile three-way catalytic converter, exhaust muffler and auto parts, hardware accessories research and development, all products exquisite workmanship, good quality, affordable, designed to meet the needs of different customers!
2：Our workers have more than 5 years of professional and rich working experience, products from material selection to welding to finished product manufacturing, every link is excellence!
3：We have advanced production equipment, can meet the various customized needs of customers!
4：We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring quick response and timely delivery.
5：Source manufacturers, self-production and self-marketing, compression of intermediate links, making product prices more advantageous!
