- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
Toyota Prado
LQSQP
97$
| Quantity: | |
|---|---|
Carbon monoxide (CO) → Carbon diox
Product introduction
Premium catalytic converter for Toyota Prado，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
First, environmental compliance and exhaust gas purification
Meet stringent emission standards
Through the catalysis of platinum (Pt), palladium (Pd), rhodium (Rh) and other precious metals, the carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in the tail gas are converted into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂), and the purification efficiency can reach more than 90%. This capability enables Prado to meet stringent global emissions regulations such as Country 6B, ensuring that vehicles pass annual inspections and are legally roadworthy.
Hybrid system collaboration: The 2025 Prado is equipped with a 2.4T oil-electric hybrid system, and the three-way catalytic converter takes into account the energy-saving needs of the hybrid model while reducing emissions.
Cope with complex conditions
As a hard off-road vehicle, Prado often faces complex working conditions such as high load and low speed. The three-way catalytic converter through the multi-stage purification design (some models are equipped with front and rear dual catalytic converter), to ensure that in the rapid acceleration, cold start and other scenarios can still effectively control pollutant emissions.
Second, optimize power performance and fuel economy
Precise air-fuel ratio control
The front oxygen sensor is linked with the three-way catalytic converter to feedback the oxygen content of the exhaust gas to the ECU in real time, and dynamically adjust the fuel injection amount, so that the air-fuel ratio is close to the ideal value (14.7:1), and the combustion efficiency is improved. This not only reduces fuel waste (about 3%-5% reduction in combined fuel consumption), but also avoids power lag.
After oxygen sensor detection: By comparing the oxygen sensor data before and after, the ECU can determine whether the catalytic converter is failed and trigger the fault alarm in time (such as P0420/P0430).
Balance exhaust back pressure
The honeycomb ceramic carrier design of the catalytic converter balances catalytic efficiency with exhaust flow, avoiding low speed torque loss or high speed power output obstruction due to abnormal back pressure, ensuring that off-road performance is not affected.
3. Economy and maintenance cost control
Reduce replacement costs
The original three-way catalytic converter contains precious metal coating, the replacement cost is high (about 3,000 yuan), but through regular maintenance (such as cleaning carbon every 30,000 kilometers) can greatly extend the service life, avoid frequent replacement 138.
Alternative: The price of domestic auxiliary parts is lower (hundreds of yuan), but the life and performance may not be as good as the original parts.
Avoid legal risk
The failure or illegal dismantling of the catalytic converter will lead to excessive exhaust gas, and face the risk of failing the annual inspection, fines and even forced scrapping of the vehicle.
Fourth, extend the life of the vehicle and the warranty rate
Protection core
By purifying sulfide and acid gas, the catalytic converter can reduce the corrosion of oxygen sensors, mufflers and other components, and delay the aging of the exhaust system. At the same time, the unburned HC is inhibited from entering the exhaust pipe to reduce the risk of carbon accumulation.
Increase used car salvage value
The status of the three-way catalytic converter is an important test item of used car trading. The integrity of the original catalytic converter can significantly improve the value of the vehicle, while failure or secondary parts may lead to depreciation.
Five, Prado exclusive design advantages
High temperature resistance and durability
For the high load requirements of off-road scenarios, the Prado catalytic catalyst uses a double-layer stainless steel housing and ceramic fiber insulation to withstand high temperatures (up to 800 ° C) and vibration for extended service life.
Anti-theft design
Some of the original catalytic converters integrate anti-demolition brackets or special welding processes to reduce the risk of theft due to the high value of precious metals
| Catalytic converter parameter | |
| Type | catalytic converter |
| Model | Toyota Prado |
| Standard | Euro IV |
| SIZE | 155cmX15cmX10cm |
| MATERIAL | 409L stainless steel |
| Substrate | Honeycomb ceramic core |
| Application | Automotive Exhaust System |
| MOQ | 1 Set |
| PAYMENT | T/T |
| Packaging & Delivery | 1：Customer requirement |
| 2：Individually bubble wrapped, cartons,pallets, wooden box | |
| PLACE OF ORIGIN | China (Mainland)Shandong |
| Port | Qingdao or Tianjin, China |
| Warranty | 50,000 kilometers a year |
Company profile
Shandong Lijianfei Auto Parts Co., Ltd. has been established for 20 years. As a comprehensive enterprise with profound heritage, we have shown excellent strength in the fields of production, sales and research and development. Our flagship product lineup includes high-performance three-way catalytic converters, innovative modified exhaust mufflers and OE exhaust pipes of all sizes! We are making catalytic converters and exhaust mufflers for all car lines, complete models! All products are made with exquisite workmanship, excellent quality, affordable, designed to meet different customer needs. In particular, our catalytic converter is made of high quality 409 stainless steel with high performance ceramic carrier, which not only significantly improves the effect of purifying exhaust gas, but also effectively eliminates engine failure lights, enhances power output and reduces fuel consumption, and has proven reliability. The exhaust muffler series is a clever blend of 409 stainless steel and top-notch muffler materials, designed for excellent noise reduction performance. Our workers have more than 5 years of professional and rich work experience, from material selection to welding to the manufacturing of finished products, every link is excellence, and all products are all according to the original exhaust pipe mold, and the original exhaust pipe is 1:1 ratio Angle of production and manufacturing! We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring fast response and timely delivery. We warmly welcome your inquiry and look forward to working with you to open a long and mutually beneficial chapter of cooperation!
Factory advantage
1：20 years of professional research and development technology experience, good at automobile three-way catalytic converter, exhaust muffler and auto parts, hardware accessories research and development, all products exquisite workmanship, good quality, affordable, designed to meet the needs of different customers!
2：Our workers have more than 5 years of professional and rich working experience, products from material selection to welding to finished product manufacturing, every link is excellence!
3：We have advanced production equipment, can meet the various customized needs of customers!
4：We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring quick response and timely delivery.
5：Source manufacturers, self-production and self-marketing, compression of intermediate links, making product prices more advantageous!
Carbon monoxide (CO) → Carbon diox
Product introduction
Premium catalytic converter for Toyota Prado，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
First, environmental compliance and exhaust gas purification
Meet stringent emission standards
Through the catalysis of platinum (Pt), palladium (Pd), rhodium (Rh) and other precious metals, the carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in the tail gas are converted into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂), and the purification efficiency can reach more than 90%. This capability enables Prado to meet stringent global emissions regulations such as Country 6B, ensuring that vehicles pass annual inspections and are legally roadworthy.
Hybrid system collaboration: The 2025 Prado is equipped with a 2.4T oil-electric hybrid system, and the three-way catalytic converter takes into account the energy-saving needs of the hybrid model while reducing emissions.
Cope with complex conditions
As a hard off-road vehicle, Prado often faces complex working conditions such as high load and low speed. The three-way catalytic converter through the multi-stage purification design (some models are equipped with front and rear dual catalytic converter), to ensure that in the rapid acceleration, cold start and other scenarios can still effectively control pollutant emissions.
Second, optimize power performance and fuel economy
Precise air-fuel ratio control
The front oxygen sensor is linked with the three-way catalytic converter to feedback the oxygen content of the exhaust gas to the ECU in real time, and dynamically adjust the fuel injection amount, so that the air-fuel ratio is close to the ideal value (14.7:1), and the combustion efficiency is improved. This not only reduces fuel waste (about 3%-5% reduction in combined fuel consumption), but also avoids power lag.
After oxygen sensor detection: By comparing the oxygen sensor data before and after, the ECU can determine whether the catalytic converter is failed and trigger the fault alarm in time (such as P0420/P0430).
Balance exhaust back pressure
The honeycomb ceramic carrier design of the catalytic converter balances catalytic efficiency with exhaust flow, avoiding low speed torque loss or high speed power output obstruction due to abnormal back pressure, ensuring that off-road performance is not affected.
3. Economy and maintenance cost control
Reduce replacement costs
The original three-way catalytic converter contains precious metal coating, the replacement cost is high (about 3,000 yuan), but through regular maintenance (such as cleaning carbon every 30,000 kilometers) can greatly extend the service life, avoid frequent replacement 138.
Alternative: The price of domestic auxiliary parts is lower (hundreds of yuan), but the life and performance may not be as good as the original parts.
Avoid legal risk
The failure or illegal dismantling of the catalytic converter will lead to excessive exhaust gas, and face the risk of failing the annual inspection, fines and even forced scrapping of the vehicle.
Fourth, extend the life of the vehicle and the warranty rate
Protection core
By purifying sulfide and acid gas, the catalytic converter can reduce the corrosion of oxygen sensors, mufflers and other components, and delay the aging of the exhaust system. At the same time, the unburned HC is inhibited from entering the exhaust pipe to reduce the risk of carbon accumulation.
Increase used car salvage value
The status of the three-way catalytic converter is an important test item of used car trading. The integrity of the original catalytic converter can significantly improve the value of the vehicle, while failure or secondary parts may lead to depreciation.
Five, Prado exclusive design advantages
High temperature resistance and durability
For the high load requirements of off-road scenarios, the Prado catalytic catalyst uses a double-layer stainless steel housing and ceramic fiber insulation to withstand high temperatures (up to 800 ° C) and vibration for extended service life.
Anti-theft design
Some of the original catalytic converters integrate anti-demolition brackets or special welding processes to reduce the risk of theft due to the high value of precious metals
| Catalytic converter parameter | |
| Type | catalytic converter |
| Model | Toyota Prado |
| Standard | Euro IV |
| SIZE | 155cmX15cmX10cm |
| MATERIAL | 409L stainless steel |
| Substrate | Honeycomb ceramic core |
| Application | Automotive Exhaust System |
| MOQ | 1 Set |
| PAYMENT | T/T |
| Packaging & Delivery | 1：Customer requirement |
| 2：Individually bubble wrapped, cartons,pallets, wooden box | |
| PLACE OF ORIGIN | China (Mainland)Shandong |
| Port | Qingdao or Tianjin, China |
| Warranty | 50,000 kilometers a year |
Company profile
Shandong Lijianfei Auto Parts Co., Ltd. has been established for 20 years. As a comprehensive enterprise with profound heritage, we have shown excellent strength in the fields of production, sales and research and development. Our flagship product lineup includes high-performance three-way catalytic converters, innovative modified exhaust mufflers and OE exhaust pipes of all sizes! We are making catalytic converters and exhaust mufflers for all car lines, complete models! All products are made with exquisite workmanship, excellent quality, affordable, designed to meet different customer needs. In particular, our catalytic converter is made of high quality 409 stainless steel with high performance ceramic carrier, which not only significantly improves the effect of purifying exhaust gas, but also effectively eliminates engine failure lights, enhances power output and reduces fuel consumption, and has proven reliability. The exhaust muffler series is a clever blend of 409 stainless steel and top-notch muffler materials, designed for excellent noise reduction performance. Our workers have more than 5 years of professional and rich work experience, from material selection to welding to the manufacturing of finished products, every link is excellence, and all products are all according to the original exhaust pipe mold, and the original exhaust pipe is 1:1 ratio Angle of production and manufacturing! We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring fast response and timely delivery. We warmly welcome your inquiry and look forward to working with you to open a long and mutually beneficial chapter of cooperation!
Factory advantage
1：20 years of professional research and development technology experience, good at automobile three-way catalytic converter, exhaust muffler and auto parts, hardware accessories research and development, all products exquisite workmanship, good quality, affordable, designed to meet the needs of different customers!
2：Our workers have more than 5 years of professional and rich working experience, products from material selection to welding to finished product manufacturing, every link is excellence!
3：We have advanced production equipment, can meet the various customized needs of customers!
4：We are proud to have a wide range of product lines and sufficient stock reserves, fully capable of handling large orders, ensuring quick response and timely delivery.
5：Source manufacturers, self-production and self-marketing, compression of intermediate links, making product prices more advantageous!
